ZyXEL Communications P-870M-I Series Manual Do Utilizador

5

P-870M-Ix Series User’s Guide

2 Drill two holes for the screws (M3*10). The centers of the 

holes should be 108 mm apart.

Note: Be careful to avoid damaging pipes or cables inside 

the wall when drilling holes for the screws.

3 Do not screw the screws all the way into the wall. Leave a 

small gap of about 0.5 cm between the heads of the 
screws and the wall. 

4 Make sure the screws can hold the weight of the P-870M-I 

with the connection cables.

5 Align the holes on the back of the P-870M-I with the 

screws on the wall. Hang the P-870M-I on the screws.

Values are accurate at the time of writing.
Table 1   Device Specifications

DSL Port

(P-870M-I1) RJ11 connector for POTS
(P-870M-I3) RJ-45 connector for ISDN

ETHERNET Port

RJ-45 connector
10/100 Mbps
Auto-sensing, auto-cross-over MDI/ MDI-X

Power Supply

AC 9 V, 1 A

Power Consumption

7 W