ZyXEL Communications NBG420N Manual Do Utilizador

Chapter 7 Wireless LAN

NBG420N User’s Guide

See the rest of this chapter for information on the other labels in this screen. 

Select No Security to allow wireless stations to communicate with the access points without 
any data encryption. 

"

If you do not enable any wireless security on your NBG420N, your network is 
accessible to any wireless networking device that is within range.

Figure 62   Network > Wireless LAN > General: No Security

The following table describes the labels in this screen.

WEP encryption scrambles the data transmitted between the wireless stations and the access 
points to keep network communications private. It encrypts unicast and multicast 
communications in a network. Both the wireless stations and the access points must use the 
same WEP key.

Apply

Click Apply to save your changes back to the NBG420N.

Reset

Click Reset to reload the previous configuration for this screen.

Table 29   Network > Wireless LAN > General

Table 30   Wireless No Security

Security Mode

Choose No Security from the drop-down list box.

Apply

Click Apply to save your changes back to the NBG420N.

Reset

Click Reset to reload the previous configuration for this screen.