ZyXEL Communications 650HW Manual Do Utilizador

Prestige 650HW ADSL Router User’s Guide 

11-8 

  Firmware and Configuration File Maintenance 

To transfer the firmware and the configuration file, follow these examples: 

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open” and the IP address of your Prestige.   

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter “root” and your SMT password as requested. The default is 1234. 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Use “put” to transfer files from the computer to the Prestige, e.g., put firmware.bin ras transfers 

the firmware on your computer (firmware.bin) to the Prestige and renames it “ras”. Similarly 
“put config.rom rom-0” transfers the configuration file on your computer (config.rom) to the 
Prestige and renames it “rom-0”. Likewise “get rom-0 config.rom” transfers the configuration 
file on the Prestige to your computer and renames it “config.rom.” See earlier in this chapter for 
more information on filename conventions. 

Step 7.  Enter “quit” to exit the ftp prompt. 

 

Menu 24.7.2 - System Maintenance - Upload System Configuration File 

 

To upload the system configuration file, follow the procedure below: 

  1. Launch the FTP client on your workstation. 

  2. Type "open" and the IP address of your system. Then type "root" and 
     SMT password as requested. 

  3. Type "put configurationfilename rom-0" where "configurationfilename" 

     is the name of your system configuration file on your workstation, which 

     will be transferred to the "rom-0" file on the system. 

  4. The system reboots automatically after the upload system configuration 

     file process is complete. 

For details on FTP commands, please consult the documentation of your FTP 

client program. For details on uploading system firmware using TFTP (note 

that you must remain on this menu to upload system firmware using TFTP), 

please see your manual. 

Press ENTER to Exit: