ZyXEL Communications 650HW Manual Do Utilizador

Prestige 650HW ADSL Router User’s Guide 

2-14 

 

Hardware Installation and Initial Setup 

System Name 

Choose a descriptive name for identification purposes.  This name can 
be up to 30 alphanumeric characters long.  Spaces are not allowed, but 
dashes “-” and underscores "_" are accepted.  

P650HW 

Location (optional) 

Enter the geographic location (up to 31 characters) of your Prestige. MyHouse 

Contact Person's 
Name (optional) 

Enter the name (up to 30 characters) of the person in charge of this 
Prestige. 

JohnDoe 

Domain Name 

Enter the domain name (if you know it) here. If you leave this field 
blank, the ISP may assign a domain name via DHCP. You can go to 
menu 24.8 and type "sys domainname" to see the current domain 
name used by your gateway. 

If you want to clear this field just press the [SPACE BAR]. The domain 
name entered by you is given priority over the ISP assigned domain 
name. 

zyxel.com.tw

Edit Dynamic DNS   Press the [SPACE BAR] to select Yes or No (default). Select Yes to 

configure Menu 1.1 — Configure Dynamic DNS (discussed next). 

Route IP 

Set this field to Yes to enable or No to disable IP routing.  You must 
enable IP routing for Internet access.   

Bridge 

Turn on/off bridging for protocols not supported (for example, SNA) or 
not turned on in the previous Route IP field.  Select Yes to turn 
bridging on; select No to turn bridging off.  

To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit 
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as 
shown next.