ZyXEL Communications 650HW Manual Do Utilizador
Prestige 650HW ADSL Router User’s Guide
3-14
Internet Access
Table 3-4 Wireless LAN Setup Field Description
FIELD DESCRIPTION
EXMAPLE
RTS
Threshold
Threshold
RTS(Request To Send) threshold (number of bytes) enables RTS/CTS
handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Setting this attribute to be larger than the maximum
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Setting this attribute to be larger than the maximum
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
2432
Frag.
Threshold
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent. Enter a
value between 256 and 2432.
messages. It is the maximum data fragment size that can be sent. Enter a
value between 256 and 2432.
2432
WEP
Encryption
Encryption
WEP (Wired Equivalent Privacy) provides data encryption to prevent
unauthorized wireless stations from accessing data transmitted over the
wireless network.
Select Disable allows wireless clients to communicate with the access points
without any data encryption.
Select 64-bit WEP or 128-bit WEP to for the type of data encryption.
unauthorized wireless stations from accessing data transmitted over the
wireless network.
Select Disable allows wireless clients to communicate with the access points
without any data encryption.
Select 64-bit WEP or 128-bit WEP to for the type of data encryption.
Disable
Default Key Enter the number of the key as an active key.
Key 1 to
Key 4
Key 4
If you chose 64-bit WEP in the WEP Encryption field, then enter 5 characters
or 10 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key (1-4).
If you chose 128-bit WEP in the WEP Encryption field, then enter 13
characters or 26 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key
(1-4).
There are four data encryption keys to secure your data from eavesdropping
by unauthorized wireless users. The values for the keys must be set up exactly
the same on the access points as they are on the wireless client computers.
or 10 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key (1-4).
If you chose 128-bit WEP in the WEP Encryption field, then enter 13
characters or 26 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key
(1-4).
There are four data encryption keys to secure your data from eavesdropping
by unauthorized wireless users. The values for the keys must be set up exactly
the same on the access points as they are on the wireless client computers.
Edit MAC
Address
Filter
Address
Filter
To edit MAC address filtering table, press [SPACE BAR] to select Yes and
press [ENTER] to open menu 3.5.1.
press [ENTER] to open menu 3.5.1.
No
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
3.9.3 Wireless LAN MAC Address Filter
The next layer of security is MAC address filter. To allow a wireless client to associate with the Prestige,
enter the MAC address of the wireless LAN card on that wireless client in the MAC address table
enter the MAC address of the wireless LAN card on that wireless client in the MAC address table