ZyXEL Communications AMG1302 Manual Do Utilizador

Chapter 7 Wireless LAN

AMG1302/AMG1202-TSeries User’s Guide

This screen allows you to configure the AMG1302/AMG1202-TSeries to give exclusive access to 
specific devices (Allow) or exclude specific devices from accessing the AMG1302/AMG1202-
TSeries (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen.

Use this screen to view your AMG1302/AMG1202-TSeries’s MAC filter settings and add new MAC 
filter rules. Click Network Setting > Wireless > MAC Authentication. The screen appears as 
shown.

Network Setting > Wireless > MAC Authentication

The following table describes the labels in this screen.

Security Mode

Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on 
this wireless network. The wireless clients which want to associate to this network 
must have same wireless security settings as the AMG1302/AMG1202-TSeries. 
After you select to use a security, additional options appears in this screen. 

Or you can select No Security to allow any client to associate this network without 
any data encryption or authentication.

OK

Click OK to save your changes.

Cancel

Click Cancel to exit this screen without saving.

More AP: Edit

Network Setting > Wireless > MAC Authentication

SSID

Select the SSID for which you want to configure MAC filter settings.

MAC List

Define the filter action for the list of MAC addresses in the MAC Address table. 

Select Disable to turn off MAC filtering.

Select Allow to permit access to the AMG1302/AMG1202-TSeries. MAC addresses not listed 
will be denied access to the AMG1302/AMG1202-TSeries. 

Select Deny to block access to the AMG1302/AMG1202-TSeries. MAC addresses not listed 
will be allowed to access the AMG1302/AMG1202-TSeries.