ZyXEL Communications AMG1302 Manual Do Utilizador
Chapter 10 Quality of Service (QoS)
AMG1302/AMG1202-TSeries User’s Guide
140
• Use the Queue screen (
) to configure QoS settings on the AMG1302/
AMG1202-TSeries.
• Use the Class Setup screen (
) to configure QoS settings on the
AMG1302/AMG1202-TSeries.
• Use the Game List screen (
) to give priority to traffic for specific
games.
10.1.2 What You Need to Know About QoS
802.1p
QoS is used to prioritize source-to-destination traffic flows. All packets in the same flow are given
the same priority. 802.1p is a way of managing traffic in a network by grouping similar types of
traffic together and treating each type as a class. You can use 802.1p to give different priorities to
different packet types.
the same priority. 802.1p is a way of managing traffic in a network by grouping similar types of
traffic together and treating each type as a class. You can use 802.1p to give different priorities to
different packet types.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DiffServ Code Point (DSCP) value
and IEEE 802.1p priority level in a matched packet. When the packet passes through a compatible
network, the networking device, such as a backbone switch, can provide specific treatment or
service based on the tag or marker.
and IEEE 802.1p priority level in a matched packet. When the packet passes through a compatible
network, the networking device, such as a backbone switch, can provide specific treatment or
service based on the tag or marker.
Finding Out More
See
for advanced technical information on QoS.
10.2 The Quality of Service General Screen
Use this screen to enable or disable QoS and set the upstream bandwidth.
Click Network Setting > QoS > General to open the screen as shown next.
Figure 60
Network Setting > QoS > General