ZyXEL Communications AMG1302 Manual Do Utilizador
AMG1302/AMG1202-TSeries User’s Guide
91
C
H A P T E R
7
Wireless LAN
7.1 Overview
This chapter describes how to perform tasks related to setting up and optimizing your wireless
network, including the following.
network, including the following.
• Turning the wireless connection on or off.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Setting up multiple wireless networks.
• Using a MAC (Media Access Control) address filter to restrict access to the wireless network.
• Performing other performance-related wireless tasks.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Setting up multiple wireless networks.
• Using a MAC (Media Access Control) address filter to restrict access to the wireless network.
• Performing other performance-related wireless tasks.
7.1.1 What You Can Do in the Wireless LAN Screens
This section describes the AMG1302/AMG1202-TSeries’s Network Setting > Wireless screens.
Use these screens to set up your AMG1302/AMG1202-TSeries’s wireless connection.
Use these screens to set up your AMG1302/AMG1202-TSeries’s wireless connection.
• Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode (
).
) to set up multiple wireless networks on
your AMG1302/AMG1202-TSeries.
• Use the MAC Authentication screen to allow or deny wireless clients based on their MAC
addresses from connecting to the AMG1302/AMG1202-TSeries (
).
• Use the WPS screen (see
) to enable or disable WPS, generate a security
PIN (Personal Identification Number) and see information about the AMG1302/AMG1202-
TSeries’s WPS status.
TSeries’s WPS status.
) to set up a Wireless Distribution System, in
which the AMG1302/AMG1202-TSeries acts as a bridge with other ZyXEL access points.
• Use the WMM screen to enable WiFi MultiMedia (WMM) to ensure quality of service in wireless
networks for multimedia applications (
).
• Use the Scheduling screen (see
) to configure the dates/times to enable
or disable the wireless LAN.
• Use the Advanced screen to configure wireless advanced features (
You don’t necessarily need to use all these screens to set up your wireless connection. For example,
you may just want to set up a network name, a wireless radio channel and security in the General
screen.
you may just want to set up a network name, a wireless radio channel and security in the General
screen.