ZyXEL Communications AMG1302 Manual Do Utilizador
Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
96
Click Network Setting > Wireless to display the General screen. Select More Secure as the
security level. Then select WPA-PSK or WPA2-PSK from the Security Mode list.
security level. Then select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 29
Wireless > General: More Secure: WPA(2)-PSK
The following table describes the wireless LAN security labels in this screen.
7.2.4 WPA(2) Authentication
The WPA2 security mode is currently the most robust form of encryption for wireless networks. It
requires a RADIUS server to authenticate user credentials and is a full implementation the security
protocol. Use this security option for maximum protection of your network. However, it is the least
backwards compatible with older devices.
requires a RADIUS server to authenticate user credentials and is a full implementation the security
protocol. Use this security option for maximum protection of your network. However, it is the least
backwards compatible with older devices.
Table 18
Wireless > General: More Secure: WPA(2)-PSK
LABEL
DESCRIPTION
Security Level
Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode
Select WPA-PSK or WPA2-PSK from the drop-down list box.
Pre-Shared Key
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only
difference between the two is that WPA(2)-PSK uses a simple common password,
instead of user-specific credentials.
difference between the two is that WPA(2)-PSK uses a simple common password,
instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
more.../hide more
Click more... to show more fields in this section. Click hide more to hide them.
WPA-PSK Compatible This field appears when you choose WPA-PSK2 as the Security Mode.
Select Enable to allow wireless devices using WPA-PSK security mode to connect to
your AMG1302/AMG1202-TSeries. The AMG1302/AMG1202-TSeries supports WPA-PSK
and WPA2-PSK simultaneously. Otherwise, select Disable.
your AMG1302/AMG1202-TSeries. The AMG1302/AMG1202-TSeries supports WPA-PSK
and WPA2-PSK simultaneously. Otherwise, select Disable.
Group Key Update
Timer
Timer
The Group Key Update Timer is the rate at which the RADIUS server sends a new
group key out to all clients.
group key out to all clients.
Encryption
This field displays the encryption type for data encryption.
If you choose WPA-PSK as the security mode, the AMG1302/AMG1202-TSeries uses
TKIP for data encryption.
TKIP for data encryption.
If you choose WPA2-PSK as the security mode and enable WPA-PSK Compatible, the
AMG1302/AMG1202-TSeries uses either TKIP and AES (TKIPAES MIX) for data
encryption.
AMG1302/AMG1202-TSeries uses either TKIP and AES (TKIPAES MIX) for data
encryption.
If you choose WPA2-PSK as the security mode but disable WPA-PSK Compatible, the
AMG1302/AMG1202-TSeries uses AES for data encryption.
AMG1302/AMG1202-TSeries uses AES for data encryption.