ZyXEL Communications G-2000 Plus Manual Do Utilizador

ZyAIR G-2000 Plus User’s Guide

Chapter 22 Menu 2 WAN Setup

262

This chapter describes how to configure the WAN using menu 2.

This chapter explains how to configure settings for your WAN port.

From the main menu, enter 2 to open menu 2.

Figure 124   Menu 2 WAN Setup

                             Menu 2 - WAN Setup

                         MAC Address:
                           Assigned By= Factory default
                           IP Address= N/A

The following table describes the fields in this menu.

Table 86   Menu 2 WAN Setup

MAC Address

Assigned By

Press [SPACE BAR] and then [ENTER] to choose one of two methods to assign a 

MAC Address. Choose Factory Default to select the factory assigned default 

MAC Address. Choose IP address attached on LAN to use the MAC Address of 

that computer whose IP you give in the following field. 

IP Address

This field is applicable only if you choose the IP address attached on LAN 

method in the Assigned By field. Enter the IP address of the computer on the 

LAN whose MAC you are cloning.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.