ZyXEL Communications USG 2000 Manual Do Utilizador
Chapter 22 IP/MAC Binding
ZyWALL USG 2000 User’s Guide
411
The following table describes the labels in this screen.
22.2.1 IP/MAC Binding Edit
Click Configuration > Network > IP/MAC Binding > Edit to open the IP/
MAC Binding Edit screen. Use this screen to configure an interface’s IP to MAC
address binding settings.
MAC Binding Edit screen. Use this screen to configure an interface’s IP to MAC
address binding settings.
Figure 306 Configuration > Network > IP/MAC Binding > Edit
Table 102 Configuration > Network > IP/MAC Binding > Summary
LABEL
DESCRIPTION
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
you can modify the entry’s settings.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific
entry.
entry.
Status
This icon is lit when the entry is active and dimmed when the entry is
inactive.
inactive.
Interface
This is the name of an interface that supports IP/MAC binding.
Number of
Binding
Binding
This field displays the interface’s total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
addresses that the interface has assigned by DHCP.
Apply
Click Apply to
save your changes back to the ZyWALL.