ZyXEL Communications VMG1312-B Manual Do Utilizador

Página de 374
 Chapter 7 Wireless
VMG1312-B Series User’s Guide
109
Note: If you do not enable any wireless security on your Device, your network is 
accessible to any wireless networking device that is within range.
Figure 30   
Wireless > General: No Security
The following table describes the labels in this screen.
7.2.2  Basic (WEP Encryption)
WEP encryption scrambles the data transmitted between the wireless stations and the access points 
(AP) to keep network communications private. Both the wireless stations and the access points 
must use the same WEP key.
Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using 
widely-available software. It is strongly recommended that you use a more 
effective security mechanism. Use the strongest security mechanism that all the 
wireless devices in your network support. For example, use WPA-PSK or WPA2-PSK 
if all your wireless devices support it, or use WPA or WPA2 if your wireless devices 
support it and you have a RADIUS server. If your wireless devices support nothing 
stronger than WEP, use the highest encryption level available.
Your Device allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be 
enabled at any one time.
Table 16   
Wireless > General: No Security
LABEL
DESCRIPTION
Security Level
Choose No Security to allow all wireless connections without data encryption or 
authentication.