ZyXEL Communications MES3500-24 Manual Do Utilizador
Chapter 40 Syslog
MES3500-24/24F User’s Guide
314
40.2 Syslog Setup
Click Management > Syslog in the navigation panel to display this screen. The syslog feature
sends logs to an external syslog server. Use this screen to configure the device’s system logging
settings.
sends logs to an external syslog server. Use this screen to configure the device’s system logging
settings.
Figure 191
Management > Syslog
The following table describes the labels in this screen.
Table 133
Management > Syslog
LABEL
DESCRIPTION
Syslog
Select Active to turn on syslog (system logging) and then configure the syslog setting
Logging Type
This column displays the names of the categories of logs that the device can generate.
Active
Select this option to set the device to generate logs for the corresponding category.
Facility
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
documentation of your syslog program for more details.
Apply Click
Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.