ZyXEL Communications P-660HNU-Fx Manual Do Utilizador
Chapter 6 Wireless
ADSL Series User’s Guide
115
6.4 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
Section 6.7.6.3 on page 125
for more information about WPS.
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
). If you want to use the WPS feature, make sure you have set the
security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Wireless Network Name
(SSID)
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless
LAN.
LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
cannot obtain the SSID through scanning using a site survey tool.
BSSID
This shows the MAC address of the wireless interface on the ZyXEL Device when
wireless LAN is enabled.
wireless LAN is enabled.
Security Level
Security Mode
Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on
this wireless network. The wireless clients which want to associate to this network
must have same wireless security settings as the ZyXEL Device. After you select to
use a security, additional options appears in this screen.
this wireless network. The wireless clients which want to associate to this network
must have same wireless security settings as the ZyXEL Device. After you select to
use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without
any data encryption or authentication.
any data encryption or authentication.
for more details about this field.
Apply
Click Apply to save your changes.
Back
Click Back to exit this screen without saving.
Table 21
Wireless > More AP: Edit
LABEL
DESCRIPTION