ZyXEL Communications 128L Manual Do Utilizador
Configuring for Internet Access 33
A
LLOCATION FOR
P
RIVATE
I
NTERNET
’
S AND
RFC 1466, G
UIDELINES FOR
M
ANAGEMENT OF
IP A
DDRESS
S
PACE
.
Once you have determined the IP address range for your local network,
you may want to use DHCP (Dynamic Host Configuration Protocol) to
assign addresses to individual hosts on the network, as an alternative to
manually configuring each host’s IP settings. See the TCP/IP Ethernet
Setup and DHCP section on page 26 for more information about
DHCP.
you may want to use DHCP (Dynamic Host Configuration Protocol) to
assign addresses to individual hosts on the network, as an alternative to
manually configuring each host’s IP settings. See the TCP/IP Ethernet
Setup and DHCP section on page 26 for more information about
DHCP.
Internet Access Configuration
The following steps describe the set-up procedure to configure your
Prestige for Internet access. The information you will need to provide
will be indicated in bold type.
Prestige for Internet access. The information you will need to provide
will be indicated in bold type.
Figure 4-2 Menu 4 - Internet Access Setup
1. From the Main Menu, enter 4 to go to Menu 4 - Internet Access
Setup as seen above.
2. ISP’s Name - Enter the name of your Internet Service Provider,
e.g., myisp. This information is for identification purposes only.