ZyXEL Communications 1600 Manual Do Utilizador

11-3

The following table describes the SNMP configuration parameters.

Get Community

Enter the Get Community, which is the password for the
incoming Get- and GetNext- requests from the management
station.

Set Community

Enter the set community, which is the password for
incoming Set requests from the management station.

Trusted Host

If you enter a trusted host, your Prestige 1600 will only
respond to SNMP messages from this address. If you leave
the field blank (default), your Prestige 1600 will respond to
all SNMP messages it receives, regardless of source.

Trap: Community

Enter the trap community, which is the password sent with
each trap to the SNMP manager.

Trap: Destination

Enter the IP address of the station to send your SNMP traps
to.

Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the
message “Press ENTER to Confirm...” to save your configuration, or press [ESC] to cancel.

11.4 SNMP 

Traps

P1600 will send traps to the SNMP manager when any one of the following events occurs:

coldStart (defined in RFC-1215) :

When the machine coldstarts, a trap will be sent after booting (power on).

warmStart (defined in RFC-1215) :

When the machine warmstarts, a trap will be sent after booting (software reboot).

linkDown (defined in RFC-1215) :

When any of the links is down, a trap will be sent with the port number. The port number is its interface index under
the interface group.

Port 1 : Ethernet LAN

Menu 22 - SNMP Configuration

SNMP:
Get Community= public
Set Community= public
Trusted Hgst= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel: