APM ABR-2502 Folheto

1  of  1

ABR-2502     ABR-2510

Standards compliance

IEEE 802.11b

Frequency band

2512 to 2584 MHz

Transmission power

200mW, 1W

Receiver sensitivity*

11 Mbps: 8% PER, -82 dBm (typical)

Antenna type

External high gain antenna

Outdoor 200mW  Input voltage DC 12V 2A; external power supply
included (input voltage 100V to 240V AC)

Outdoor 1W  Input voltage DC 15V 3A; external power supply
included (input voltage 100V to 240V AC)

Data rates

1, 2, 5.5, and 11 Mbps with auto fallback

RF spreading scheme

Direct-sequence spread-spectrum (DSSS)

Encoding and modulation

BPSK, QPSK, and CCK

Security

64-bit / 128-bit Wired Equivalent Privacy (WEP) encryption; MAC
Access Control; Administrative Access Control

Kick Start

Web-based Tool

Bridge Auto Learning

Network Management System

Windows 95/98/ME/NT4.0/2000/XP

Environmental requirements

Operating temperature: -30° to +70° C

Software Support

* Minimum receiver input power level at which a packet error ratio (PER) of less than the indicated
percentage can be maintained, given a packet length of 1024 bytes and conditions of 20° to 30° C.

Input Power

 1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist, Taipei 114, Taiwan, R.O.C.

www.apm.com.tw   apm.sales@msa.hinet.net    Tel: +886 2 26335543    Fax: +886 2 26330472