Agilent Technologies 20ET Manual Do Utilizador
4-40
Printing, Plotting, and Saving Measurement Results
Saving Measurement Results
Figure 4-13 Data Processing Flow Diagram
NOTE
If the analyzer has an active two-port measurement calibration, all four
S-parameters will be saved with the measurement results. All four
S-parameters may be viewed if the raw data array has been saved.
S-parameters will be saved with the measurement results. All four
S-parameters may be viewed if the raw data array has been saved.
1. If you want to title the displayed measurement, refer to
2. Press
.
3. Choose one of the following disk drives:
•
•
(If necessary, refer to the external disk setup procedure in
.)
4. Press
.
5. Define the save by selecting from the following choices:
❏
❏
❏
Save/Recall
SELECT DISK
INTERNAL DISK
EXTERNAL DISK
Save/Recall
DEFINE DISK-SAVE
DATA ARRAY ON
RAW ARRAY ON
FORMAT ARY ON