Alloy Computer Products WLF2454AP-S Manual Do Utilizador

 

 

 

Alloy Wireless 802.11g User’s Guide                       www.alloy.com.au 

24

 
  

 

Enter the name of the public service or other Internet application in the field provided.

 

 

 

Enter the numbers of the External Ports (the port numbers seen by users on the Internet).

 

 

Click this checkbox if the application requires TCP.

 

 

Click this checkbox if the application requires UDP.

 

 

Enter the IP Address of the PC running the application.

 

 

Click the Enable checkbox to enable port forwarding for the application.

 

 

Port Triggering is used for special Internet applications whose outgoing ports differ from the 
incoming ports. For this feature, the Router will watch outgoing data for specific port numbers. 
The Router will remember the IP address of the computer that sends a transmission requesting 
data, so that when the requested data returns through the Router, the data is pulled back to the 
proper computer by way of IP address and port mapping rules. Click the Port Triggering button 
to set up triggered ports, and follow these instructions:

 

 

 

1.

       

Enter the Application Name of the trigger.

 

 

 

2.

       

Enter the Outgoing Port Range used by the application. Check with the Internet application 

for the port number(s) needed.

 

 

 

3.

       

Enter the Incoming Port Range used by the application. Check with the Internet application 

for the port number(s) needed.

 

 

 

4.

       

Click the Apply button to save your changes. Click the Cancel button to cancel your 

unsaved changes. Click the Close button to return to the Port Forwarding screen.

 

 

 

Check all the settings and click Apply to save them.