ZyXEL Communications X6004 Manual Do Utilizador

Página de 334
 Chapter 14 Authority Group
X6004 User’s Guide
141
14.3.10  Add an FXS Extension 
Use this screen to add an FXS extension to an authority group on the X6004. To access this 
screen, click the Add icon in the Authority Group configuration screen.
Figure 116   Add an FXS Extension 
Each field is described in the following table.
DTMF Mode
Control how the X6004 handles the tones that the IP phone using this extension 
makes when you push its buttons. One use of the tones is to distinguish between 
numbers when trying to dial a PSTN phone number. You should use the same 
mode as your VoIP service provider. The choices are:
rfc2833 - Follow the RFC 2833 standard and send the DTMF tones in RTP 
packets.
inband - Send the DTMF tones in the voice data stream. This works best 
when you are using a codec that does not use compression (like G.711). 
Codecs that use compression (like G.729) can distort the tones.
info - Send the DTMF tones in SIP messages.
MWI Mode
Check this box to enable Message Waiting Indicator (MWI) mode for this 
extension. The X6004 sends a beeping tone to the IP phone when there is at least 
one voicemail for this extension.
Group Pickup
Check this box if you want to enable the group pickup feature for this extension. If 
this extension is added to a pickup group, then the phone at this extension rings 
when any extension that is part of this pickup group is called. See 
 for more information on group pickup.
Apply
Click this to save your changes.
Back to Peer List
Click this to go back to the Authority Group configuration screen without saving 
your changes. 
Table 48   SIP Extension: Advanced Screen
LABEL
DESCRIPTION
Table 49   Add an FXS Extension
LABEL
DESCRIPTION
Basic Setting
Extension 
Number
Type the extension number for this analog phone extension. The extension 
number can be from 1 to 20 digits in length.
Interface
Specify the location on the FXS interface card that the analog phone with this 
extension is connected to.
Web/IVR/VM PIN 
Code
Type the PIN code that this allows the person with this extension to access the 
web portal, Interactive Voice Response system or Voice Mail. This value can be 
up to eight alphanumeric characters and spaces are not allowed.