ZyXEL Communications X6004 Manual Do Utilizador

Chapter 18 Outbound Line Group

X6004 User’s Guide

Use this screen to select which auto-attendant should be used with this outbound line group. 
See 

 for information on configuring auto-attendant. You can also 

configure your DID (Direct Inward Dialing) settings. Click the Auto-Attendant icon in the in 
the SIP Trunk section of the Outbound Group configuration screen to view the screen as 
shown.

Figure 148   AA for SIP Trunks 

Each field is described in the following table.

Use this screen to setup Direct Inward Dialing (DID) mappings for the X6004. Click the DID 
Mapping button in the Auto-Attendant screen to view the screen as shown. 

Table 68   AA for SIP Trunks

Auto-Attendant

DID

Select Enable to have the X6004 check if the numbers dialed by outside callers  to 

the X6004 match any of the extensions on your network. The X6004 forwards calls 

that match Dialed-In-Digits rules you configure in the DID Mapping screen to the 

extensions on your network. Click DID Mapping to configure Direct Inward Dialing 

rules.
Select Disable to allow all incoming calls to be handled by the Auto-Attendant.

Apply AA

Select the Auto-Attendant you want to use when calls come in on this outbound 

line group. If you want to forward all incoming calls on this SIP trunk to be 

forwarded to a fax machine located at a specific extension, then select FAX. 

Extension 

Number for Fax

This field is only available if you select FAX in the Apply AA field. Type the 

extension of the Fax machine you want to forward calls to. 

Apply

Click this to save your changes and to apply them to the X6004.

Cancel

Click this to go to the Outbound Group screen without saving your changes.