ZyXEL Communications X6004 Manual Do Utilizador

 Chapter 5 The Web Configurator

X6004 User’s Guide

If you forget the administrator password, you will need to reset the X6004 back to the factory 
defaults.
Use the RESET button on the front panel of the X6004 to reset the X6004 back to factory 
defaults. Press and hold the RESET button for 10 seconds. The X6004 will reload its factory 
defaults.
The X6004 is reinitialized with a default configuration file including the default administrator 
username (admin) and password (1234). The LAN IP address of the X6004 also reverts to the 
default 192.168.1.12 and the WAN IP address reverts to 172.16.1.1.

If the X6004 is not performing as expected, you can reboot the system as a basic 
troubleshooting step. Rebooting the X6004 does not change any of the configuration settings. 
Rebooting simply restarts all of the subsystems (voice processing, network interfaces and so 
on) and reloads the latest saved configuration on the X6004.   
Click Maintenance > Reboot to open the Reboot screen. Click the Reboot button to restart 
the X6004.

Figure 72   Maintenance > Reboot 

Click the Logout button (

) in the navigation panel to exit the web configurator. You have 

to log in with your password again after you log out. This is recommended after you finish a 
management session for security reasons.

           

Left

Use this icon to move selected items from right to left in a 

screen.

Right

Use this icon to move selected items from left to right in a 

screen.

Table 11   Icon Explanation Table  (continued)

or

or