ZyXEL Communications X6004 Manual Do Utilizador

Chapter 6 Network Deployment

X6004 User’s Guide

In a subnetted LAN environment the X6004 is typically connected to a router. The router 
specifies the subnet to which the X6004 is directly connected and the X6004 has no 
knowledge of the subnets beyond. For instance, the X6004 knows about the IP phones in 
subnet N1 in the following figure. However, the X6004 is unable to route a packet to phones in 
subnet N2 because it doesn't know that there is a route through Router 1 (R). Static routes tell 
the X6004 about the subnets beyond the router its directly connected to.

Figure 79   Example of Static Routing Topology

Use this screen to look at static routes in the X6004. Click Configuration > Network > Static 
Route to open the Static Route screen. 

Figure 80   Configuration > Network > Static Route

End Date

Enter which hour on which day of which week of which month daylight-savings 

time ends.

Offset

Enter the amount of time (in hours) by which to adjust the time during daylight 

saving period.

Apply

Click this to save your changes.

Reset

Click this to set every field in this screen to its last-saved value.

Table 15   Configuration > Network > NTP