Black Box LGB1148A Manual Do Utilizador
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 111
Chapter 3: Configuration
3.10.2 Ports
User can configure all parameters to each port in VLAN Port Setting. These parameters involved two parts, Ingress rule and Egress
rule. The function of Port Type, Ingress Filtering, Frame Type, and PVID affect Ingress process. Furthermore, Port Type, Egress Rule,
and PVID affect Egress process.
rule. The function of Port Type, Ingress Filtering, Frame Type, and PVID affect Ingress process. Furthermore, Port Type, Egress Rule,
and PVID affect Egress process.
Web Interface
To configure VLAN Port configuration in the Web interface:
1. Click VLAN Port Configuration.
2. Specify the VLAN Port Configuration parameters.
3. Click Save.
Figure 3-53. The VLAN Port Configuration screen.
Parameter Description
• Ethertype for Custom S-ports: This field specifies the ether type used for Custom S-ports while s-custom-port enabled. This is
a global setting for all the Custom S-ports. Custom Ethertype enables the user to change the Ethertype value on a port to any
value to support network devices that do not use the standard 0x8100 Ethertype field value on 802.1Q-tagged or 02.1P-tagged
frames.
value to support network devices that do not use the standard 0x8100 Ethertype field value on 802.1Q-tagged or 02.1P-tagged
frames.
• Port: Indicate the port number of each port.
• Port Type: A port can be one of the following types: Unaware, C-port, S-port, and S-custom-port.
LGB1108A