Black Box LGB1148A Manual Do Utilizador

724-746-5500 | blackbox.com

Page 183

Chapter 4: Security

Reinitialize: Forces a reinitialization of the clients on the port—and thereby a reauthentication—immediately. The clients will

transfer to the unauthorized state while the reauthentication is in progress.

• Buttons:

- Save: Click to save changes.

- Reset: Click to undo any changes made locally and revert to previously saved values.

• Icon, upper right of screen (Refresh): Click to refresh the NAS Configuration information manually.

4.5.2 Switch Status

This section describes how to display port NAS status information for the switch. The status includes Admin State, Port State, Last
Source, Last ID, QoS Class, and Port VLAN ID.

Web Interface

To configure a NAS Switch Status Configuration in the Web interface: Check “Auto-refresh”.

Figure 4-12. The Network Access Server Switch Status screen.

Parameter Description

• Port: The switch port number. Click to navigate to detailed NAS statistics for this port.

• Admin State: The port’s current administrative state. Refer to NAS Admin State for a description of possible values.

• Port State: The current state of the port. Refer to NAS Port State for a description of the individual states.

• Last Source: The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and

the most recently received frame from a new client for MAC-based authentication.

• Last ID: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-

based authentication, and the source MAC address from the most recently received frame from a new client for MAC-based
authentication.

• QoS Class: QoS Class assigned to the port by the RADIUS server if enabled.

• Port VLAN ID: The VLAN ID that NAS has put the port in.

The field is blank, if the Port VLAN ID is not overridden by

NAS. If the VLAN ID is assigned by the RADIUS server, “(RADIUS-assigned)“ is appended to the VLAN ID. If the port is moved
to the Guest VLAN, "(Guest)" is appended to the VLAN ID.

• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.

• Icon, upper right of screen (Refresh): Click to refresh the NAS Switch Status information manually.

LGB1108A