Black Box LGB1148A Manual Do Utilizador
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 27
Chapter 2: System Configuration
2.4.2 IPV6
This section describes how to configure the switch-managed IPv6 information. The Configured column is used to view or change
the IPv6 configuration. And the Current column is used to show the active IPv6 configuration.
the IPv6 configuration. And the Current column is used to show the active IPv6 configuration.
Configure the switch-managed IPv6 information on this page.
The Configured column is used to view or change the IPv6 configuration.
The Current column is used to show the active IPv6 configuration.
Web Interface
To configure Management IPv6 of the switch in the Web interface:
1. Click System, IPv6 Configuration.
2. Specify the IPv6 settings, and enable Auto Configuration service if required.
3. Click Save.
Figure 2-9. The IPv6 Configuration screen.
Parameter Description
• Auto Configuration: Enable IPv6 auto-configuration by checking this box. If fails, the configured IPv6 address is zero. The r
outer may delay responding to a router solicitation for a few seconds, the total time needed to complete auto-configuration can
be significantly longer.
be significantly longer.
• Address: Provide the IPv6 address of this switch. IPv6 address is represented in 128-bit records as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example, in “fe80::215:c5ff:fe03:4dc7“, the symbol “::“ is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It can also represent a legally valid IPv4 address. For example, “::192.1.2.34“.
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It can also represent a legally valid IPv4 address. For example, “::192.1.2.34“.
• Prefix: Provide the IPv6 Prefix of this switch. The range is 1 to 128.
• Router: Provide the IPv6 gateway address of this switch. IPv6 address is represented in 128-bit records as eight fields of up to
four hexadecimal digits with a colon separating each field (:). For example, in “fe80::215:c5ff:fe03:4dc7“, the symbol “::“ is a
special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only
appear once. It can also represent a legally valid IPv4 address. For example, “::192.1.2.34“.
special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only
appear once. It can also represent a legally valid IPv4 address. For example, “::192.1.2.34“.
LGB1108A