Black Box LGB1148A Manual Do Utilizador

724-746-5500 | blackbox.com

Page 93

Chapter 3: Configuration

3.8.2 LLDP Neighbors

This page provides a status overview for all LLDP neighbors. The displayed table contains a

row for each port on which an LLDP neighbor is detected. The columns hold the following

information:

Web Interface

To show LLDP neighbors:

1. Click LLDP Neighbors.

2. Click Refresh for manual update Web screen.

3. Click Auto-refresh for auto-update Web screen.

Figure 3-43: The LLDP Neighbor information screen.

NOTE: If your network supports LLDP, without any external devices connected, then the table will say “No LLDP neighbor
information found”.

Parameter Description

• Local Port: The port on which the LLDP frame was received.

• Chassis ID: The Chassis ID is the identification of the neighbor's LLDP frames.

• Remote Port ID: The Remote Port ID is the identification of the neighbor port.

• System Name: System Name is the name advertised by the neighbor unit.

• Port Description: Port Description is the port description advertised by the neighbor unit.

• System Capabilities: System Capabilities describes the neighbor unit’s capabilities. The possible capabilities are:

1. Other

2. Repeater

3. Bridge

4. WLAN Access Point

5. Router

6. Telephone

7. DOCSIS cable device

8. Station only

9. Reserved

When a capability is enabled, the capability is followed by (+). If the capability is disabled, the capability is followed by (-).

LGB1108A