Cisco Systems 566 Manual Do Utilizador
1-15
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 1 Introducing the Content Engine
Hardware Features
Fibre Channel Connector
The Fibre Channel connector (see
) is an LC-style connector that
supports nonoptical fibre conductive (nonOFC), multimode fiber-optic cabling
using a small form factor (SFF) fiber-optic transceiver module. The Fibre Channel
adapter uses LC-LC Fibre Channel cables. The total cable length should not
exceed 1640 feet (500 meters). Fibre Channel cables are not supplied by
Cisco Systems.
using a small form factor (SFF) fiber-optic transceiver module. The Fibre Channel
adapter uses LC-LC Fibre Channel cables. The total cable length should not
exceed 1640 feet (500 meters). Fibre Channel cables are not supplied by
Cisco Systems.
Figure 1-13
Fibre Channel Connector
Video Port
The CE-511 and CE-566 support one optional MPEG A/V decoder adapter that
has one audio and video input/output port.
has one audio and video input/output port.
Video Connectors
shows the following five connectors for the audio and video
input/output port:
•
3 BNC connectors for YUV, RGB, and composite video output
•
Mini-XLR 8-pin connector for Sony/Philips Digital Interface (S/PDIF) and
analog stereo audio output
analog stereo audio output
•
Mini-XLR 8-pin connector for video graphics array (VGA) output
83287