Foundry Networks FGS624P-POE Manual Do Utilizador

FastIron GS Compact Layer 2 Switch Hardware Installation Guide

2 - 4

© 2007 Foundry Networks, Inc.

September 2007

Figure 2.3 shows the FGS648P and FGS648P-POE

The FGS648P and FGS648P-POE have the following ports:

•

48 10/100/1000 Copper ports that support 100Base-TX and 1000Base-T RJ-45 connectors

•

Four Gigabit Fiber uplink ports (1F – 4F) for mini-GBIC optical transceivers (also called Small Form Factor 
Pluggable (SFP) Multisource Agreement (MSA)-compliant optical transceivers)

Note that ports 1 – 4 of the copper ports and 1F – 4F of the fiber ports are combination ports, meaning either 
the copper port or its corresponding fiber port can be active at a time.  For example, for copper port 1 and 
fiber port 1F, only one of these ports can be active at any given time.  The same applies to copper port 2 and 
fiber port 2F, and so forth.  You can use a combination of fiber and copper ports or all four copper or all four 
fiber ports, as needed.  For more information, see “Combination Ports” on page 2-7. 

•

Optionally, two 10-GbE ports.  See “10 Gbps Ports” on page 2-7.

Each device’s front panel has the following control features:

•

Serial management interface (the port labeled Console)

•

Reset button

•

10/100/1000 ports with RJ-45 copper connectors

•

100/1000 ports with mini-GBIC slots for SFP MSA-compliant fiber transceivers

•

The FGS624XGP and FGS624XGP-POE have one 10-Gigabit Ethernet port for XFP MSA compliant fiber 
connector(s)

•

Optionally, two

 

10 Gigabit Ethernet ports for XFP MSA-compliant fiber connectors

•

LEDs for ports, power supplies, and stacking

1

1.Reserved for possible use in the future.