Yamaha YSP-40D Manual Do Utilizador

In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other 
manufacturers. To control other components, you must set up the remote control with the appropriate remote control 
codes and set the operation mode selector to TV/AV to change the control area.

Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if 
a remote control code is set. In this case, operate the component using the supplied remote control.

You can control other components by setting the 
appropriate remote control codes. Codes can be set up for 
each input area (DVD, AUX1, AUX2, STB, and TV).
For a complete list of available remote control codes, refer 
to “List of remote control codes” at the end of this manual.

The transmission indicator flashes twice and remains 
lit.
Proceed to step 2 while holding down CODE SET.

If the external component functions correctly the 
remote control code setup is successful.
If the external component does not function correctly, 
the remote control code may be incorrect. Confirm 
that the remote control code is correct. See “List of 
remote control codes” at the end of this manual and 
start over from step 1.

If the manufacturer of your component has more than one code, 
try each of them until you find the correct one.

If the remote control is without batteries for more than 
two minutes, or if exhausted batteries remain in the 
remote control, the contents of the memory may be 
cleared. When the memory is cleared, insert new 
batteries and reset the remote control codes.
When changing the batteries, be careful not to press 
any of the buttons on the remote control. Doing so will 
clear the contents of the memory.