Yamaha YSP-40D Manual Do Utilizador

Página de 129
116 
En
Troubleshooting
DAB
iPod
In case of a transmission error with no status message appearing in the front panel display and in the OSD, check the connection 
between your iPod and this unit.
Problem
Cause
Remedy
See 
page
Cannot tune into any DAB 
services.
INIT SCAN has not been performed yet, or 
the DAB registry list needs to be updated.
Perform INIT SCAN
There may be no DAB coverage in your 
area.
Check with your dealer or visit WorldDAB 
online at “http://www.worlddab.org” for a 
listing of the DAB coverage in your area.
The DAB signals are weak.
Use a commercially available high-quality 
outdoor DAB antenna.
The INIT SCAN operation 
was not successful, and “Not 
Available” appears in the 
front panel display.
The DAB antenna may not be connected.
Make sure that the DAB antenna is firmly 
connected.
The DAB signals are weak.
Use a commercially available high-quality 
outdoor DAB antenna.
There is no DAB service in your area.
The DAB service reception is 
weak.
The position of the indoor DAB antenna 
and/or this unit is not optimal for DAB 
reception.
Use TUNE AID to locate the best location 
of the indoor DAB antenna and this unit for 
optimal DAB reception.
The DAB signals are weak.
Use a commercially available high-quality 
outdoor DAB antenna.
There is noise interference 
(e.g. hiss or crackle)
The indoor DAB antenna needs to be 
repositioned.
Readjust the position of the indoor DAB 
antenna.
The DAB signals are weak.
Use a commercially available high-quality 
outdoor DAB antenna.
The DAB service information 
does not appear or is 
inaccurate.
The DAB service may be temporarily out of 
service or is not provided by the DAB 
broadcasting company.
Contact the DAB broadcasting company.
Note
Status message
Cause
Remedy
See 
page
Loading...
This unit is in the middle of recognizing 
the connection with your iPod.
This unit is in the middle of acquiring the 
song lists from your iPod.
Connect error
There is a problem with the signal path 
from your iPod to this unit.
Turn off this unit and reconnect the Yamaha iPod 
universal dock to the DOCK terminal of this unit.
Try resetting your iPod.
Unknown iPod
Your iPod is not supported by this unit.
Only iPod (Click and Wheel), iPod nano, and iPod 
mini are supported.
iPod connected
The connection between your iPod and 
this unit is completed.
Disconnected
Your iPod is removed from the Yamaha 
iPod universal dock.
Set your iPod back in the Yamaha iPod universal 
dock.
Unable to play
This unit cannot play back the files stored 
on your iPod.
Check the playability of the files stored on your iPod.
Store other playable music files on your iPod.