Yamaha YSP-40D Manual Do Utilizador

■

■

• Pull out the cap before connecting the optical cable. 

When you are not using the optical cable, be sure to put the cap 
back in place.

• When inserting the cable into the optical digital jack, make sure 

the direction is correct.

■

To prevent cables from becoming unplugged, place the supplied 
cable clamp with the open side facing upward, attach it to the rear 
panel of this unit in a suitable position, and then affix cables in 
the cable clamp.

■

• When CPPM copy-protected DVD audio is played back, video and 

audio signals may not be output depending on the type of DVD player. 

• This unit is not compatible with HDCP-incompatible HDMI or 

DVI components.

y

• We recommend that you use an HDMI cable shorter than 5 m 

(16 ft) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack 

↔

 DVI-D jack) to connect 

this unit to other DVI components.

■

When multiple types of audio signals are simultaneously 
being input from a single source component, this unit 
plays back the audio signals in the following priority 
order: HDMI 

→

 Digital 

→

 Analog

As default settings, the following input jacks are assigned 
to the corresponding input sources:

(White)

(Red)

(White)

(Red)

(Orange)

(Orange)

(Yellow)

(Yellow)

(Green)

(Green)

(Blue)

(Red)

(Blue)

(Red)

DVD video

Dolby Digital, DTS, PCM

DVD audio

2-channel stereo 

(up to 96 kHz/24 bit)

Blu-ray Disc

HD DVD

Dolby Digital, DTS, PCM

TV/STB

DVD

AUX 1

AUX 2

AUX 3