Yamaha YSP-40D Manual Do Utilizador

For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL 
DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog 
audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to 
the coaxial digital audio connection.
For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of 
this unit. If your DVD player/recorder has component video output jacks, connect the component video output jacks of 
your DVD player/recorder to the DVD/AUX 2 COMPONENT VIDEO IN jacks of this unit. Once the component video 
connection is made, you can enjoy images with better resolution.

y

To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 18).

• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system 

settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.

• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see 

 

*1

You can only make 
either a composite 
or a component 
connection.

*2

For the DVD/
VCR combo 
player/recorder 
connection

*1

*1

*2

*2