Yamaha YSP-40D Manual Do Utilizador

If your component supports optical digital connections, connect the optical digital output jack on your component 
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL IN jack on this unit. If your component does not support 
optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL 
DIGITAL IN jack on this unit. If your component does not support any digital connections, connect the analog audio 
output jacks on your component (e.g., VCR) to the AUX 1 AUDIO IN jacks on this unit.
For video connection, connect the video output jack of your DVD player/recorder, etc. to the DVD/AUX 2 VIDEO IN (or 
AUX 1 VIDEO IN) jack of this unit. If your DVD player/recorder, etc. has component video output jacks, connect the 
component video output jacks of your DVD player/recorder, etc. to the DVD/AUX 2 COMPONENT VIDEO IN jacks of 
this unit. Once the component video connection is made, you can enjoy images with better resolution.

y

To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 18).

If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at 
the AUX 1 OPTICAL DIGITAL IN or AUX 2 COAXIAL DIGITAL IN jack take priority over the analog audio signals input at the AUX 
1 AUDIO IN jacks.

 

*

You can only

make either a

composite or a

component

connection.

*

*