Yamaha YSP-40D Manual Do Utilizador

■

Depending on the input source and the selected surround 
mode, the indicators in the front panel display light up as 
follows:

y

• You can select an input mode (AUTO, DTS, or ANALOG) by 

pressing INPUTMODE repeatedly (see page 97).

• Discs encoded in DTS-ES, Dolby Digital 5.1 EX, Dolby Digital 

EX, or Dolby Digital Surround EX will be played back in DTS 
or Dolby Digital.

■

Depending on the channel component of the current 
digital input signal, the input channel indicators in the 
front panel display light up as follows:

■

• When you select an input source (see page 44), the surround 

mode used for the previously selected input source is 
automatically selected.

• If the power of this unit is turned off and on again, the surround 

mode used for the previously selected input source before the 
power was turned off is automatically selected.

• If the surround modes are not available, “Prohibit” appears in 

the front panel display when you press SUR. DECODE.

• The surround modes are available:

– when the beam mode is set to a setting other than the 2-

channel or 5-channel stereo playback (see page 66) and My 
Surround (see page 61).

– when the CINEMA DSP programs are turned off 

(see page 73).

– when the movie program is selected as the CINEMA DSP 

program (see page 72). In this case, only Dolby Pro Logic, 
Dolby Pro Logic II Movie, and DTS Neo:6 Cinema are 
available.

– when 2-channel signals are being input.
– when the Music Enhancer is turned off (see page 74).

When PCM signals are being input

When DTS digital signals are being 
input

When DTS Neo:6 is selected as the 
surround mode

When Dolby Digital signals are 
being input

When Dolby Pro Logic is selected 
as the surround mode

When Dolby Pro Logic II is selected 
as the surround mode

When 2-channel stereo signals are 
being input

When 5.1-channel signals are being 
input

–

All sources

Movie 
Music 

Game

Movies 

Music 

Games

Cinema 

Music

Movies 

Music