Yamaha YSP-40D Manual Do Utilizador

To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment 
parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the 
initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

y

• You can save the settings optimized by the AUTO SETUP procedure (see page 41). A set of settings optimized according to the 

specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening 
environment (see page 42).

• Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 34). Use 

SOUND MENU and BEAM MENU to make additional adjustments.

• BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.
• Make settings for the parameters in BEAM MENU first before making settings for the parameters in SOUND MENU, INPUT MENU, 

and DISPLAY MENU.

Use to manually adjust the various parameters related to the sound output.

Use to manually adjust the various parameters related to the sound beam output.

Use to manually adjust the various parameters related to the audio and video input.

Use to manually adjust the various parameters related to the display.

Adjusts the output level of high-frequency or low-frequency sound.

Adjusts the various subwoofer settings.

Adjusts the muting level.

Adjusts the audio delay.

Adjusts the tonal quality of the listening room.

Adjusts the dynamic range of Dolby Digital or DTS signals.

Selects the bass sound enhancer.

Adjusts the listening room and listening position settings.

Adjusts the various sound beam settings.

Adjusts the sound position of the front left and right channels.

Assigns jacks according to the component to be used.

Selects the initial input of the source.

Adjusts the input level of the source.

Renames the displayed input source.

Adjusts the various HDMI settings.

Adjusts the front panel display settings.

Adjusts the OSD settings.

Changes the display unit of measurement.