Canon WUX4000 Manual Do Utilizador
Troubleshooting
204
■There is no Sound
Connection with the input terminal
has not been performed correctly.
has not been performed correctly.
Check whether the AV equipment is connected to the pro-
jector input terminal correctly. (
jector input terminal correctly. (
)
No input signal type has been
selected for the connected AV
equipment.
selected for the connected AV
equipment.
Check that the same input signal has been correctly
selected for the connected AV equipment from the [INPUT]
menu. (
selected for the connected AV equipment from the [INPUT]
menu. (
The input signal type is incorrect.
Check whether the selected input signal type is correct.
(
(
The BLANK function has been
selected.
selected.
Press the
BLANK button on the remote control. (
No image is projected due to a
problem with the computer.
problem with the computer.
Turn first the projector and then the computer off and then
back on again.
back on again.
The external monitor output is not
set on the notebook computer
correctly.
set on the notebook computer
correctly.
Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the
[LCD] or [VGA] function key or a key with an icon for the
external monitor, while holding down the [Fn] key on the
keyboard of the notebook computer. With Windows 7, you
can turn on image output by holding down the Windows
logo key and pressing the [P] key. (
puter. To turn on the external monitor output, press the
[LCD] or [VGA] function key or a key with an icon for the
external monitor, while holding down the [Fn] key on the
keyboard of the notebook computer. With Windows 7, you
can turn on image output by holding down the Windows
logo key and pressing the [P] key. (
The combination of keys used to perform this operation var-
ies depending on the model of notebook computer. For
more detailed information, refer to the manual that came
with your computer.
ies depending on the model of notebook computer. For
more detailed information, refer to the manual that came
with your computer.
The displayed image is not the
same as that displayed on the
computer.
same as that displayed on the
computer.
Check whether the dual screen (multi-display) mode is
selected on the computer. If the dual screen mode has
been selected, change it to the simultaneous display mode
on the computer.
The output setting method varies among computer manu-
facturers. For more detailed information, refer to the manual
that came with your computer.
selected on the computer. If the dual screen mode has
been selected, change it to the simultaneous display mode
on the computer.
The output setting method varies among computer manu-
facturers. For more detailed information, refer to the manual
that came with your computer.
Cause
Countermeasure
The audio cable is not connected
correctly.
correctly.
Check the audio cable connection. (
The MUTE function is enabled.
Press the
MUTE button on the remote control. (
)
The volume level is adjusted to
the minimum.
the minimum.
Press the
VOL button on the remote control or the VOL+
button on the side control to adjust the volume level. (
)
An audio cable with a built-in
resistor is used.
resistor is used.
Use an audio cable without a built-in resistor.
Audio in terminal select is [Off]
(WX6000 / SX6000).
(WX6000 / SX6000).
Change the Audio In terminal to the appropriate setting.
(
(
)
Cause
Countermeasure