Benq SH910 Manual Do Utilizador
Operation
34
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
saturated colors; a setting of “0” removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
6.
Press
to highlight Gain and adjust its values to your preference by pressing
/
.
The contrast level of the primary color you select will be affected. Every adjustment
made will reflect to the image immediately.
made will reflect to the image immediately.
7.
Repeat steps 3 to 6 for other color adjustments.
8.
Make sure you have made all of the desired adjustments.
9.
Press MENU/EXIT to exit and save the settings.
Remote paging operations
Connect the projector to your PC or notebook with a
USB cable prior to using the paging function.
You can operate your display software program (on a
connected PC) which responds to page up/down
commands (like Microsoft PowerPoint) by pressing
USB cable prior to using the paging function.
You can operate your display software program (on a
connected PC) which responds to page up/down
commands (like Microsoft PowerPoint) by pressing
Page Up/Down
on the remote control.
If remote paging function doesn't work, check if the
USB connection is correctly made and the mouse
driver on your computer is updated to the latest
version.
USB connection is correctly made and the mouse
driver on your computer is updated to the latest
version.
Hiding the image
In order to draw the audience's full attention to the
presenter, you can use BLANK on the projector or
remote control to hide the screen image. Press any key
on the projector or remote control to restore the image.
The word 'BLANK' appears at the screen while the
image is hidden. When this function is activated with
an audio input connected, the audio can still be heard.
presenter, you can use BLANK on the projector or
remote control to hide the screen image. Press any key
on the projector or remote control to restore the image.
The word 'BLANK' appears at the screen while the
image is hidden. When this function is activated with
an audio input connected, the audio can still be heard.
You can set the blank time in the
SYSTEM SETUP:
Basic >
Operation Settings
> Blank Timer
menu
to let the projector return the image
automatically after a period of time when there is no action taken on the blank screen. The
length of time can be set from 5 to 30 minutes in 5-minute increments.
length of time can be set from 5 to 30 minutes in 5-minute increments.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated.
become heated.
Setting the Sleep Timer
You can set the Sleep Timer interval so the projector powers off after the specified time
period of inactivity (regardless of signal).
period of inactivity (regardless of signal).
Set the sleep timer in the
SYSTEM SETUP: Basic
> Operation Settings > Sleep Timer from
among Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/ 12hr.
Freezing the image