Benq mw814st Manual Do Utilizador

Operation

20

Adjusting the projected image

Adjusting the projection angle

The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These 
adjusters change the image height and projection angle. To adjust the projector:

1.

Press the quick-release button and lift the front 
of the projector. Once the image is positioned 
where you want it, release the quick-release 
button to lock the foot in position.

2.

Screw the rear adjuster foot to fine-tune the 
horizontal angle.

To retract the foot, hold up the projector while 
pressing the quick-release button, then slowly lower 
the projector. Screw the rear adjuster foot in a reverse 
direction.

If the projector is not placed on a flat surface or the 
screen and the projector are not perpendicular to 
each other, the projected image becomes trapezoidal. 
To correct this situation, see 

 for details.

Auto-adjusting the image

In some cases, you may need to optimize the picture quality. To do this, press Auto on the 
projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment 
function will re-adjust the values of Frequency and Clock to provide the best picture quality. 

The current source information will be displayed in the corner of the screen for 3 seconds.

Fine-tuning the image clarity

Sharpen the image by rotating the focus ring. 

2

1