Sanyo PLC-XF71 Manual Do Utilizador

Shutter function is available to block out light to the 

screen, so that the screen can be used for the other 

presenters.

Prohibits the shutter operation from the remote control 

and the projector's side control.

Remote control    Selecting "On" prohibits the shutter 

operation from the remote control.  

Projector   . . .       Selecting "On" prohibits the shutter 

operation from the side control.

It is possible to prohibit the shutter operation from both of 
the remote control and the side control.

The Shutter Management function turns off the projection 
lamp

 when the projector is left with the shutter closed and 

the set time has passed away. The count-down time can be 
set between 5 and 180 minutes.  When the count-down time 
has elapsed, the shutter will be opened up automatically and 
the lamp will be turned off to cool itself down. The SHUTTER 
indicator is blinking blue during this cooling-off period. When 
the lamp has been fully cooled down, the READY indicator 
turns green lighting and the SHUTTER indicator keeps 
blinking. Should the ON / STAND-BY button be pressed in 
this condition, the projection lamp will be turned on and the 
SHUTTER indicator turns off.

This function is used to reset the lamp counter. 

When the lamp life reaches a recommended lamp replacement 
time, the time shown in the dialog box turns red and the Lamp 

replacement icon appears on the screen, indicating that the end 

of lamp life is approaching.

When replacing the projection lamp, reset the lamp counter. 

See “Resetting the Lamp Counter” on page 62.

This icon appears on the screen when the end of lamp life is 

approaching.

✔

✔

✔