Sanyo PLC-XU350K Manual Do Utilizador
3
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the highlight to the Mode that you
want to clear and then press the SELECT button.
the SELECT button. Move the highlight to the Mode that you
want to clear and then press the SELECT button.
✔
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 70p, 1035i, or 1080i is selected in the PC
System Menu (p.29).
System Menu (p.29).
• When input computer signal to the projector, PC adjust
will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
parameters.
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Vertical, Display area H, and
Display area V.
Vacant
Press SELECT button to
store adjusted data
store adjusted data
Press MENU button
to close this dialog
box.
to close this dialog
box.
Computer Input