Sanyo PLC-XU350K Manual Do Utilizador

Select Digital zoom +. The On-Screen Menu disappears and
D . zoom + appears. Press the SELECT button to expand the
image size. Use the Point

ed

7 8

buttons to pan the image.

The Panning function can work only when the image is larger
than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the
D.ZOOM

e

or

the SELECT

button on the remote control.

To exit the Digital zoom +/– mode, press any button except
the D.ZOOM

ed

and the SELECT buttons.

Select Digital zoom –. The On-Screen Menu disappears
and D . zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM

d

or the SELECT

button on the remote control.

To  return  to  the  previous  screen  size,  select  a  screen  size
from  the  Screen  Size Adjustment  Menu  or  select  an  input
source  from  the  Input  Source  Selection  Menu  (see  pages
27-28)  again,  or  adjust  the  screen  size  with  the  D.ZOOM

ed

buttons.

✔ 

 • The  panning  function  may  not  operate

properly  if  the  stored  Mode  in  the  PC
Adjust Menu is used (p.32).

• The minimum compression ratio is limited

depending  on  the  input  signal,  when  the
Keystone function is working or when the
custom is selected for the screen size.

 • True, Full, and Digital zoom +/– cannot

be  selected  when  480i,  575i,  480p,  or
575p is selected in the PC System Menu
(p.29).

 • Digital zoom +/- cannot be selected

when Full or True is selected.

Adjust  the  screen  scale  and  position  manually  with  this
function.
Press  the  Point

8

 button  at  Custom  and  the  Custom  is

displayed on the screen, you can use the Point

ed 

buttons

to choose the item you want to adjust.
 Scale H/V ..........  Adjust the Horizontal/Vertical screen

scale.

 H&V ...................  When  set  to  On,  the  aspect  ratio  is

fixed. The Scale V appears dimmed and
becomes  unavailable. Adjust  Scale  H,
then  the  screen  scale  is  automatically
modified based on the aspect ratio.

 Position H/V .....  Adjust  the  Horizontal/Vertical  screen

position.

 Common ...........  Save the adjusted scale or position to all

the  inputs.  Press  the  SELECT  button  at
Common  to  display  a  confirmation  box.
To  save  the  scale  or  position,  press  the
SELECT  button  at  yes.  When  Custom
is selected, the saved scale or position is
used.

 Reset .................  Reset  the  all  adjusted  values.  Press

the  SELECT  button  at  Reset  to  display
a  confirmation  box.  To  reset,  press  the
SELECT button at yes.

✔ 

 • When  no  signal  is  detected,  Normal  is  set

automatically  and  the Aspect  dialog  box
disappears.

 • The adjustable range for Scale H/V and

Position H/V is limited depending on the
input signal.