Sanyo PLC-XU350K Manual Do Utilizador

Use  the  Point

7 8

 buttons  to  adjust  the  gamma  value  to

obtain a better balance of contrast (from 0 to 15).

Press the Point

7

button to decrease the sharpness of the

image; press the Point

8

button to increase the sharpness

of the image (from 0 to 15).

An  interlaced  video  signal  can  be  displayed  in  progressive
mode. Select one of the following options.
 Off .......... Disabled.
 L1 .......... For an active picture.
 L2 .......... For a still picture.
 Film ........ For watching a film. With this function, the

projector reproduces pictures faithful to the
original film quality.

Noise  interference  on  the  screen  can  be  reduced.  Select
one of the following options to get smoother images.
 Off .......... Disabled.
 L1 .......... Lower reduction
 L2 .......... Higher reduction

✔ 

Note:

 • Noise  reduction  and  Progressive  cannot  be  selected

when  480p,  575p,  70p,  1035i,  or  1080i  is  selected
(p.39).

 • Reset  and  Store  icons  will  be  displayed  when  any

adjustment is made.

To  reset  the  adjusted  data,  select  Reset  and  press  the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.

To  store  the  adjusted  data,  select  Store  and  press  the
SELECT  button.  Use  the  Point

ed

 buttons  to  select  one

from Image 1 to 4 and press the SELECT button.
A  confirmation  box  appears  and  then  select  yes.  Stored
data  can  be  called  up  by  selecting  an  Image  (1–4)  in  the
Image Mode Selection on page 33.

A confirmation box
appears and then
select yes .