Sanyo PLC-XU350K Manual Do Utilizador

Unplug the AC power cord before cleaning.

Gently  wipe  the  projection  lens  with  a  cleaning  cloth  that
contains  a  small  amount  of  non-abrasive  camera  lens
cleaner,  or  use  a  lens  cleaning  paper  or  commercially
available air blower to clean the lens.

Avoid  using  an  excessive  amount  of  cleaner. Abrasive
cleaners,  solvents,  or  other  harsh  chemicals  might  scratch
the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth.
When  the  cabinet  is  heavily  soiled,  use  a  small  amount  of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using  an  excessive  amount  of  cleaner. Abrasive  cleaners,
solvents, or other harsh chemicals might scratch the surface
of the cabinet.

When  the  projector  is  not  in  use,  put  the  projector  in
an  appropriate  carrying  case  to  protect  it  from  dust  and
scratches.

When  moving  this  projector  or  while  not  using  it  over  an
extended period of time, replace the lens cap.

Attach the lens cap according to the following procedures.

Thread the string through the hole on the lens cap and
then tie a knot in the string to secure it in place.

To pass the other end of the string into the hole on the
top of the projector and pull at it.