Sanyo PLC-ET30L Manual Do Utilizador

The following lens operation can be made with the Lens 

button on the top control. 

Press the Lens button to enter each lens operation mode. 

The selected adjustment display appears on the screen.

Display “Lens shift” on the screen. Use the Point 

ed7 8

 

buttons to position the screen to the desired point without 

having picture distortion. 

The screen can be moved up or down to 50 percent, or 

sideways up to 15 percent from the central axis of the 

lens shift.

✔

Display “Zoom” on the screen. Use the Point 

ed

 buttons 

to zoom in and out the image.

Display “Focus” on the screen. Use the Point 

ed

 buttons 

to adjust focus of the image.

Information display can be used to confirm the current 

operating condition of the projector and the signal being 

projected through the projector.

Press the INFO. button on the top control or remote control 

to display the information window on the screen. To hide 

the information window, press the INFO. button again or 

Point 

7 8

 buttons.

The information window can also be selected from the 

menu.

Information Menu

* The H- and V-sync freq. values described in this figure 

may be different from the actual values.