Sanyo PLC-XU355K Manual Do Utilizador

Use  the  Point 

◄►

  buttons  to  adjust  the  gamma  value  to 

obtain a better balance of contrast (from 0 to 15).

Press the Point 

◄

 button to decrease the sharpness of the 

image; press the Point 

►

 button to increase the sharpness 

of the image (from 0 to 15).

An interlaced video signal can be displayed in progressive 

mode. Select one of the following options.

  Off ......... Disabled.

  L1 .......... For an active picture.

  L2 .......... For a still picture.

  Film ....... For watching a film. With this function, the 

projector reproduces pictures faithful to the 

original film quality.

Noise  interference  on  the  screen  can  be  reduced.  Select 

one of the following options to get smoother images.

  Off ......... Disabled.

  L1 .......... Lower reduction 

  L2 .......... Higher reduction

Note:

 

  • Noise reduction and Progressive cannot be selected 

when 480p, 575p, 720p, 1035i or 1080i is selected 

(p.41).

  • Reset and Store icons will be displayed when any 

adjustment is made.

To  reset  the  adjusted  data,  select  Reset  and  press  the 

SELECT button. A confirmation box appears and then select 
Yes

. All adjustments will return to their previous figures. 

To  store  the  adjusted  data,  select  Store  and  press  the 

SELECT  button.  Use  the  Point 

▲▼

  buttons  to  select  one 

from Image 1 to 4 and press the SELECT button. 

A  confirmation  box  appears  and  then  select  Yes.  Stored 

data  can  be  called  up  by  selecting  an  Image  (1–4)  in  the 

Image Mode Selection on page 35.

A confirmation box 

appears and then 

select Yes.