Sanyo PLC-XU355A Manual Do Utilizador

Filter counter , Reset?

appears.

Select

yes, then another

confirmation box appears.

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens

cleaner or use a lens cleaning paper or commercially

available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents or other harsh chemicals might scratch

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth.

When the cabinet is heavily soiled, use a small amount of

mild detergent and finish with a soft dry cleaning cloth. Avoid

using an excessive amount of cleaner. Abrasive cleaners,

solvents or other harsh chemicals might scratch the surface

of the cabinet.

When the projector is not in use, put the projector in

an appropriate carrying case to protect it from dust and

scratches.

When moving the projector or while it is not in use, replace

the lens cap.

Thread the string through the hole on the lens cap and

then tie a knot in the string to secure it in place.

To pass the other end of the string into the hole on the

top of the projector and pull at it.