Sanyo PLC-XU350 Manual Do Utilizador

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on pages 71.)

One of the following messages may appear when:

The  projector  cannot  recognize  the  connected
signal  conforming  to  the  provided  PC  Systems.
Auto  is  displayed  on  the  System  Menu  box
and  the  Auto  PC  Adjustment  function  works
to  display  proper  images.  If  the  image  is  not
projected  properly,  a  manual  adjustment  is
required (pp.31-32).

There  is  no  signal  input  from  the  computer.
Check  the  connection  between  your  computer
and  the  projector.  (See  “Troubleshooting”  on
page 64.)

The  preset  system  is  manually  adjusted  in  the
PC  Adjust  Menu.  The  adjusted  data  can  be
stored in Mode 1–5 (pp.31-32).

PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually.

Press the MENU button to display the On-Screen
Menu. Use the Point

ed

buttons to select Input and

then press the Point

8

or the SELECT button.

Use the Point

ed

buttons to select Systerm and then

press the Point

8

or the SELECT button.

Use the Point

ed

buttons to select the desired system

and then press the SELECT button.

The PC System Menu
Selected system is
displayed.

Systems in this
dialog box
can be selected.

Customized Mode 
(1–5) set in the
PC Adjust Menu
(pp.31-32).