Sanyo PLC-WL2500 Manual Do Utilizador

⑤

 

S-VIDEO IN
Connect the S-VIDEO output signal from video

equipment to this jack (p.15).

⑨

 

AUDIO IN
Connect the audio output signal from video

equipment connected to ⑤ or ⑩ to this jack.
For a monaural audio signal (a single audio

jack), connect it to the L (MONO) jack (p.15).

⑧

 

COMPUTER / COMPONENT AUDIO IN
Connect the audio output (stereo) from a

computer or video equipment connected to ②,
③ or ④ to this jack (pp.14,16).

⑩

 

VIDEO IN
Connect the composite video output signal to

this jack (p.15).

③

 

COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart

21-pin video output or component video output to

this terminal (pp.14,16).

⑥  AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack

(pp.14-16).

This terminal outputs sound from AUDIO IN

terminal (⑧ or ⑨) or HDMI terminal ② (digital
audio).

①

 

LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual

of "Network Set-up and Operation").

⑧

⑨

⑦  CONTROL PORT

When controlling the projector with RS-232C,

connect the control equipment to this connector

with the serial control cable.

⑩

③

④

②

①

②

 

HDMI
Connect the HDMI signal from computer or video

equipment to this terminal (pp.14,16).

④

 

This terminal is switchable and can be used for

input from a computer or output to the other monitor.

Set the terminal up as either Computer input or

Monitor output properly. [Used for Monitor out,

this terminal outputs only incoming signal from

COMPUTER IN 1/COMPONENT IN terminal (pp.

14, 50)].

   

  is registered trademarks of HDMI

Licensing, LLC.

⑤

⑥

⑦