Sanyo PLC-WL2503A Manual Do Utilizador

Use  the  Point

◄►

 buttons  to  adjust  the  gamma  value  to

obtain a better balance of contrast (from 0 to 15).

Press the Point

◄

button to decrease the sharpness of the

image; press the Point

►

button to increase the sharpness

of the image (from 0 to 15).

An interlaced video signal can be displayed in progressive

mode. Select one of the following options.

 

Off ......... Disabled.

 

L 1 ......... For an active picture.

 

L 2 ......... For a still picture.

 

Film ....... For watching a film. With this function, the

projector reproduces pictures faithful to the

original film quality.

Noise reduction
Noise  interference  on  the  screen  can  be  reduced.  Select

one of the following options to get smoother images.

 

Off ......... Disabled.

 

L 1 ......... Lower reduction.

 

L 2 ......... Higher reduction.



    

Noise reduction and Progressive can not be selected

when

480p, 575p, 720p, 1035i or 1080i is selected

(p.39), or

 Video delay control function is set to On in

Setting menu (p.57).

To reset the adjusted data, select

Reset and press the

SELECT button. A confirmation box appears and then select

yes. All adjustments will return to their previous figures.

Store
To store the adjusted data, select

Store and press the Point

►

button or the SELECT button. Use the Point ▲▼ buttons

to select one from Image 1 to 4 and press the SELECT

button.

A confirmation box appears and then select

yes. Stored

data can be called up by selecting an Image (1-4) in the

Image Mode Selection on page 40.

A confirmation box

appears and then

select